SX-HOLGA
Internal flexible circuit spread at the bottom of the camera. I must remove it and replace with wires to convert it for 120 type film. |
The other angle of the bottom of the camera. Gear train is covered by flexible circuit. Some contact to check the sequence of mecanism is shown here. |
 Circuit for driving motor and checking the film counter. |
 |
 Holga camera is cut and shortened using hot glue. |
 film holder is attached at the bottom of the camera. Left to right, original SX-70, modified and original Holga camera. |
 |
 Internal modification of SX-HOLGA, the flexible circuit and metal frame is cut to pass through the roll film. |
 Top white part is the connecter for batteries which is used to drive SX-70. Wires in the camera is used to replace flexible print circuit. |
 Left to right, internal film guide with pressure plate, camera, and back door. |
 Film gate |
 Loading finished |
 The frame number printed at back paper is visible through the center of roll film holder |
 |